9
NOTICE
1. When you move the appliance, hold it at its base and lift it carefully.
Keep the appliance in an upright position.
2. Do not tilt the appliance more than 450.
3. If the appliance is transported in a horizontal position, some oil may
flow from the compressor into the refrigerant circuit.
4. Leave the appliance in an upright position for 4 - 6 hours before
you switch it on to ensure, that the oil has flowed back into the
compressor.
5. Never use the door for moving the appliance as you will damage the
hinges.
6. The appliance must be transported and installed by at least two
persons .
7. When you unpack the appliance, you should take note of the position
of every part of the interior accessories in case you have to repack
and transport it at a later point of time.
8. Do not operate the appliance unless all components are installed
properly.
9. Do not stand or lean on the base, the drawers, the doors etc of the
appliance.
10. Do not put hot liquids or hot foodstuff into the appliance.
11. The air vents of the appliance or its built-in structure (if the appliance
is suitable for being built-in) must be completely open, unblocked
and free of any kind of dirt.
SAVE THESE INSTRUCTI ONS.
The manufacturer and distributor are not responsible for any
damage or injury in the event of failure to comply with these
instructions.
