13
Setting of the temperature
Initial operation: Plug in the appliance and turn the rotary knob clockwise.
Fig. similar: modifications are possible
WARNING! THE THERMOSTAT CONTROLS THE COMPRESSOR ONLY.
You must unplug the appliance to disconnect it from the mains.
1
Light on/off
2
Rotary knob
MIN
Lowest setting (warmest cooling temperature)
MAX
Highest setting (coldest cooling temperature)
NORMAL
Recommended setting at cool ambient temperatures
Initial operation: Set the thermostat to MAX until the desired cooling temperature has been
reached; then set the thermostat to NORMAL. Correcting the temperature will be easier at a later
point in time.
You can additionally use a fridge-thermometer
1
to check the cooling temperature.
1
Not included in delivery
Operation parameters
1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
c. you do not open the doors too often or too long.
d. the door seals are in proper condition.
e. the appliance is properly positioned.
f. you have not overfilled the appliance.
g. you do not store warm or hot food in the appliance.
2. High ambient temperatures and simultaneously operating at the coldest setting may make
the compressor operate permanently to keep the temperature constant inside the appliance.
