16
1. The appliance is equipped with an automatic defrost-system.
2. The water is drained at the back inside the appliance.
3. The water is collected in a container underneath the compressor. The water evaporates in this
container.
4. The drain must not be blocked.
5. Clean the drain carefully with a pipe cleaner.
Replacing of the illuminant
WARNING!
The lamp on this device must only be changed by a qualified technician!
1. Set the thermostat to MIN and disconnect the appliance from the mains, before you change
the illuminant.
2. Remove the screw of the illuminant cover with a screwdriver.
3. Remove the illuminant cover.
4. Unscrew the old illuminant (anticlockwise direction).
5. Replace the old illuminant with a new one of the same kind and power.
6. Reinstall the cover.
Replacing of the power cord
DANGER!
The power cord must be replaced by a qualified and authorized professional only.
