18
UNUSUAL NOISE.
1. The appliance is not installed on a level, dry
and solid floor.
2. The appliance is in contact with a wall or
another item. The bottles are incorrectly
positioned.
3. Some items have dropped behind the
appliance.
1. Realign the appliance.
2. Readjust the appliance. Realign the bottles.
3. Remove these items.
If the appliance shows a malfunction not noted on the schedule above or if you have checked
all items on the above schedule but the problem still exists, please contact the shop you
purchased the appliance at.
THE OPERATING CONDITIONS DESCRIBED BELOW ARE NORMAL AND DO NOT
INDICATE A MALFUNCTION.
The refrigerant generates a sound similar to flowing water.
Sometimes you may hear a sound which is generated by the injection process of the cooling
circuit.
The sides of the appliance may get warm while the appliance is running.
Distinct noise
When you operate the appliance for the first time or the temperature falls below a certain level,
the appliance will operate with high power to reach the preset temperature.
Condensed water in / on the appliance
Condensed water in / on the appliance may be generated inside or outside the appliance by high
humidity or very warm ambient temperatures.
Clicking
You will hear the compressor click if it is activated or deactivated.
Hum
Hum is caused by the compressor while running.
Knocking / snapping
Knocking / snapping may be generated by sequential expansion and shrinkage of the
components of the cooling system. It is caused by variation of temperature before and after the
compressor is activated or deactivated.
