6
Tips
• It is intended to be used exclusively for the storage of wine.
• This refrigerating appliance is not suitable for the freezing foodstuffs.
• The wine cooler is recommended to be designed at 12°C.
• The shelves placed in factory mode is the most efficient use of energy for the refrigerating
appliances.
• The following combination of shelves is recommended for energy to be used as efficiently as
possible by the refrigeration unit.
THERE ARE SEVEN SHELVES AND ONE DISPLAY SHELF IN TOTAL
The first shelf
The second shelf
The third shelf
The fourth shelf
The fifth shelf
The sixth shlef
The seventh shelf
The display shelf
• When the surrounding temperature is 25°C and the wine cooler has no bottle loaded, it will
take around 30 minutes to increase the wine cooler’s temperature from 5°C to 12°C. Under the
same circumstance, it will take around one hour to decrease the wine cooler’s temperature
from 12°C to 5°C. The less the temperature span is, the less time it will take
• The setting temperature of upper zone should be lower than the setting temperature of lower
zone
• The wine cooler is recommended to be designed at 12°C.The energy consumption is
0.419kWh/24h. If the setting temperature is higher than 12°C, the energy consumption will be
lower. If the setting temperature is lower than 12°C, the energy consumption will be higher.
• When the compressor works for 12 hours, the compressor will stop and defrost for 30 minutes
