5
OPERATING INSTRUCTIONS
I. Making a bag with bag roll
1. Put the rolls into the bag roll storage area.
2. Pull out the bag material to the suitable length and use the bag cutter to cut a bag. If the bags
in your hand is the pre cut bags, then, it can working with the machine directly.
3. Put one end of the bag on top of the sealing element, but not enter the vacuum chamber.
4. Close the cover and press handle to lock the cover.
5. Press “Manual Seal” button to start sealing the bags. The indicator light to indicate sealing
operate, progress LED will show the sealing progress.
6. When the indicator turn off, the sealing is done, rise the handle to open the cover and take the
bag out of the machine. the bag is then done and is ready for vacuum sealing.
II. Vacuum packaging with a bag
1. Put the items inside the bag. Use only the special designed vacuum bags supplied by us with
vacuum air channels.
2. Clean and straighten the open end of the bag, make sure no dust, wrinkle or ripples.
3. Place the open end of the bag within the vacuum chamber area. Make sure the air intake is
not covered by the bag.
4. Put the cover down and press handle to lock the cover.
5. Check the LED status of the
“Sealing”
to confirm sealing time depending on the moisture
status of packed items(dry / moist) according to the type of food;
6. Then press
VAC&SEAL
button, the unit start to vacuum and will seal the bag automatically.
The indicator light to indicate vacuum and sealing operate, progress LED will show the
vacuum&sealing progress.
NOTE:
This product provides very high vacuum pressure during vacuum packaging with a
bag, in order to avoid crushing of the delicate item by the high vacuum pressure, observe
the status of the vacuum pressure inside the bag and switch the
“MANUAL SEAL”
button
immediately when the desired vacuum pressure is achieved. The pump will stop and change
to heat-seal the bag.
7. When the indicator turn off ,the vacuum packaging is done. rise the handle to open the cover
and take out the packed bags.
Summary of Contents for GZ-306
