7
DEFROST
The heavy frost will influence the refrigerating of the appliance and increase the energy
consumption. Thus, defrosting is needed as the frost is as thick as 5 mm. Processes of the
manual defrost are listed as following: take all the food out of the compartment; uninstall the
drawers and shelves; unplug the electronic power cord; open the doors and wait for the thaw;
wipe up the water with dry cloth.
Do not use any other equipment or method to push the defrost process. It may destroy the
cooling system.
DISCONNECTING THE APPLIANCE
After power failure, even in summer, the refrigerator can store food normally in several hours.
1. Discontinuation during power failure
After power failure, do not put additional food in the appliance and reduce the frequency of
door opening. Make several ices in a container if know the power failure beforehand, and put
it in the top of the fridge.
2. Discontinuation during vacation
Please fetch out the easy-rot food and the food in fridge before shot vacation. After confirmation,
close the door firmly. lf have a long vacation, please fetch out all the food and cut off the power.
After defrosting, clean up the liner of the appliance and wipe it dry, and leave the door open.
3. Stop using
If the refrigerator may be stopped using fora long time, please unplug the outlet and clean up
the appliance. The door should be kept open in order to prevent unpleasant smell caused by
food leavings.
Attention
In a general condition, do not stop the appliance in case of affecting its life. After unplugging the
power, please leave at least 5 minutes before resumption.
USER NOTIFICATIONS
1. Do not splash water on the refrigerator, as it will cause oxidation and malfunction. Electronic
component such as on/off button should be wiped dryly.
2. Cleansers such as soap powder, abrasive cleaning powder, alkali cleansers, chemical cloth,
thinner, alcohol, acid petroleum product and hot water should not be used to clean the
refrigerator as they may damage the painted cover and plastics.
3. Smear can damage the interior plastic component, so wipe it as soon as possible.
4. Please check the points below after maintenance:
(1) Is there any damage or loss of the electronic wire ?
(2) Can the plug be put in the socket reliably and smoothly?
(3) Is the plug heating unconventionally?
Warning
Please get rid of the gasket of the door before the disposal. The disposed apparatus should be
handled by professional staff, as it may be harmful to the environment.
