2. Correctly positioning
Well Ventilating
There is need of good ventilation around the refrigerator for easy dissipation
of heat, high efficiency of refrigeration and low power consumption. For this
purpose, sufficient clear space should be need around the refrigerator. Its back
is at least 100mm away from the wall, its sides at least have a space of 100 mm
separately and the height from over its top is not less than 200mm. A clear space
should be left to open its doors to 160 °.
Power Supply
The refrigerator is only applied with power supply of single phase alternating
current of (220-240)V~/50Hz;230V~/60Hz.If fluctuation of voltage in the
district user is of so large that the voltage exceeds the above scope,
for safety sake, be sure to apply a.c. automatic voltage regulator to the
refrigerator. The refrigerator must employ a special power socket instead of
common one with other electric appliances. Its plug must match the socket
with ground wire.
Power Line Cord
The cord should be neither lengthened nor folded into coil during
operation. Moreover, it is forbidden that cord is kept close onto the
compressor at the back of the refrigerator, the surface temperature of
which is quite high when operating. Touching with it would deactivate
the insulation or cause leakage for electricity.
Protection from Moisture
Avoiding placing the refrigerator in a place where heavy moisture is
present so as to minimize possibility of rusty for its metal parts. Still
more, the refrigerator is forbidden to be directly sprayed by water,
otherwise, poor insulation and current leakage would occur.
¡À
¡À
Summary of Contents for GZ-340
Page 10: ......
