3
• Children should be supervised to ensure they don not play with the appliance.
• WARNING: This appliance must be earthed. Connect only to a suitably earthed
220 - 240 V~50 Hz power supply socket or outlet.
• Always inspect your appliance before use. Check if the parts are attached
correctly.
• The non-stick surface inside the frypan must be cleaned and conditioned before
using the frypan.
• Do not use sharp-edged metal cooking tools (like knives, forks, food choppers
etc.) as they scratch non-stick surface and get heated or risk of electric shock.
• Plastic, rubber and wooden cooking tools are recommended for use on the non-
stick surface.
• When not in use store your appliance and all its accessories and instruction
manual in a safe and dry place.
• Before storage, ensure the appliance is fully dried with a clean dry towel and no
dampness is present.
• Regular maintenance of your appliance will keep it safe and in proper
operational order. Recommended clean after every use.
USING YOUR APPLIANCE:
• Put the unit on a flat surface, connect to the power cord, and plug in. Turn on the
control knob; hear alarm sound, the indicator comes on. Pre-heating time is 5-10
minutes.
• To adjust the cooking temperature of plate, turn the control knob with MAX/MIN
sign.
• Because the surface is very hot, it is recommended to put the appliance on
anti-flame and heat-proof mat. It is also recommended that the minimal distance
between walls or other flammable components is not less than 15cm.
• It is possible that a slight smoke smell will come out during first use.
• During first use, drop some oil on the surface of plate then wipe it with dry cloth.
• In order not to damage the plate, when turning or moving food, make sure a
spatulas is used.
• Do not put other cooking pans which do not belong, on the appliance.
CLEANING:
• To Stop the unit, turn the control knob to MIN position until the power light is
OFF, pull out the plug then pull out the power cord
(NOTE: Do not pull the power cord while pulling the plug)
• Before cleaning or moving this appliance, make sure the appliance is unplugged
and cooled down sufficiently. (NOTE: the power cord can’t be immersed in water,
nor is water allowed to come into the power cord box).
