9
Troubleshooting
Problem
Possible cause
The fr
eezer
does not operate. • It is not plugged in. Ensure it is properly plugged in and
there is power at the socket (plug another appliance into
the outlet to check).
• The circuit breaker tripped or has blown a fuse.
• The fr
eezer
temperature control is set to OFF.
• A general power outage has cut power to your home
(check the household lights).
The fr
eezer
temperature is not
cool enough.
• The room temperature is hotter than normal.
• A large amount of food has been added at once.
• The door is opened too often.
• The door is not closed completely.
• The temperature control is not set correctly.
• The door gasket does not seal properly.
There are vibrations.
• The fr
eezer
is not level.
The fr
eezer
seems to make too
much noise.
• A rattling noise may come from the flow of the
refrigerant, which is normal. A popping and crackling
noise may be caused by the contraction and expansion
of the inside walls.
• The fr
eezer
is not level, or is touching other furniture.
• Bottles or packages inside the fr
eezer
are touching each
other.
The door will not close
properly.
• The fr
eezer
is not level.
• The door was reversed and is not properly installed.
• The gasket is dirty or bent.
• The shelves, racks or crisper are out of position.
The fr
eezer
door will not open. • If the door has just been opened, leave it for a few
minutes to allow the air pressure to equalise before
trying again.
Moisture forms on the inside
or outside walls of the bar
fr
eezer
.
• Hot and humid weather increases the internal rate of
frost build-up. This is normal.
• Open the door less often and make sure it is always
properly closed.
If you experience a problem with your bar fr
eezer
, check in the following table for solutions
to help you solve the problem. If after these checks you still have a problem with your bar
fr
eezer
, call the after sales support line for advice.
