6
4. The safety grille has 4 clips that now need to be lifted to allow the fan to completely
assemble. (Figure 3.)
5. Align the top locking clip to the top of the rear safety grill that has already been
secured to the fan motor. Lock the side locking clips in place and align the bottom hole
for a security nut and bolt. Undo the security lock and bolt and thread the aligned holes
in the security tools before doing up the bolt with a pair of pliers or similar tool.
6. Your 23cm Desk Fan that can now be used. Please ensure that the power supply outlet
corresponds with the power rating on the compliance plate located either on the base
of the fan or on the motor housing. There should be no bends in the power cord to
ensure the correct operation of the appliance.
7. As well as allowing for an oscillating action of cooling, the basket can be tilted up and
down to further direct the airflow. The oscillating action can be cancelled by pulling
up the knob located on the back of the motor housing. This will stop the fan in the
direction desired.
Assemble your Pedestal Fan (Cont.)
