9
Troubleshooting
Before calling for service , please check the following issues first:
The Appliance
does not operate
- The Appliance is not
switched ON.
- Mains plug is not plugged
in or is loose.
- Fuse has blown or is
defective.
- Socket is defective.
- Switch ON the appliance.
- Insert mains plug.
- Check fuse, replace if
necessary.
- Mains malfunctions are
to be corrected by an
electrician.
Appliance cools
too much
- Temperature is set too cold.
- Temperature is not properly
adjusted.
- Turn the temperature
regulator to warmer setting
temporarily.
- Please check the ‘‘ USING
THE APPLIANCE’’ section
to learn how to adjust the
temperature regulator.
Food is too warm
- Door was opened for an
extended period of time.
- A large quantity of warm
food was placed in the
appliance within the last
24 hours.
- The appliance is near a heat
source.
- Open the door only as long
as necessary.
- Turn the temperature
regulator to a cooler setting
temporarily.
- Please check the ‘‘ USING
THE APPLIANCE’’ section
to learn how to adjust the
temperature regulator to
offset the heat source, or
find another suitable place.
Unusual noise
- Appliance not level.
- Appliance is touching the
wall of others.
- A component, e.g. a pipe
on the rear of the appliance
is touching another part of
the appliance or the wall.
- Readjust the foot
- Move the appliance slightly.
- If necessary, carefully bend
the component out of the
way.
Heavy build up
of frost, possibly
on the door seal.
- Door seal is not air tight
(possibly after reversing
the door).
- Carefully warm the leaking
sections of the door seal
with a hair dryer (on a cool
setting). At the same time
shape the warmed door
seal by hand such that it sits
correctly.
Summary of Contents for GVABF42
Page 1: ...Instruction Manual 42L Bar Fridge GVABF42 ...
Page 12: ......
