Basic Set Up
6.
If the filter unit is inserted correctly in the dust container, the
upper arrow points towards the lower arrow of the closed lock
symbol (see picture).
7.
To remove the filter unit, turn the dust container lid until the
upper arrow points towards the lower arrow of the open lock
symbol.
8.
Pull the filter unit up and out.
9.
Clean the dust container and the filter unit if
necessary with a damp cloth and mild
detergent. Then wipe with a dry cloth.
10.
Make sure when cleaning that the HEPA
filter does not get wet. You can read about
how to clean the HEPA filter in the Care and
Maintenance section.
11.
To put the dust container and the filter unit back together
again, you must insert the filter unit in such a way that the
upper arrow points towards the open lock symbol.
12.
Turn the dust container lid until the upper arrow points
towards the closed lock symbol and locks in place.
13.
Insert the dust container back into the vacuum cleaner. The
dust container must be heard to engage in place.
10
