2
Important safety instructions
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed
including the following:
1. Don’t place any part of toaster in water or any liquid
2. First use toaster for a few minutes without bread. There will be a little smoke but it is
entirely normal.
3. Don’t touch the hot surface
4. If the cord is damaged, to avoid hazards, it must be replaced by the manufacturer or
by an Authorized technical service.
5. Don’t be use outdoors
6. Keep toaster out of reach of children
7. Use only Pre-sliced bread
8. Don’t insert oversize foods, metal foil packages, or metal utensils to avoid an electric
shock
9. Don’t use toaster near the place which is contain curtain and decorative fabric etc. In
this way it is easy to occur a fire.
10. Don’t place on or near hot gas, electric burner or heated oven.
11. Don’t operate in the presence of explosive or flammable fumes.
12. When toaster plug is inserted, please don’t move the food.
13. Don’t clean with metal scouring pads. Pieces can break off the pad and touch electrical
pats involving a risk of electrical shock.
14. Make sure break off power supply, when it is cool, put on and remove the crumb
plate.
15. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised be supervised to
ensure that they don’t play with the appliance.
16. When the tool work, can touch superficial temperature are very high.
17. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of appliance by a
person responsible for their safety, children should be supervised to ensure that they
don’t play with the appliance.
18. When the tool work, touching superficial temperature will be very high
19. The appliance is not intended to be operated by means of an external timer or
separate remote-control system.
