36
The SL5598 motherboard uses AWARD
BIOS, which is stored in a Flash EEPROM
and can be upgraded by a floppy disk-based
program. The BIOS has a built-in Setup
Program which allows users to modify the
basic system configuration settings. The
settings are then stored in a dedicated
battery-backed memory, called CMOS
RAM that retains the information when the
power is turned off. The BIOS provides critical low-level support for the system’s
central processing, memory and I/O subsystems. The AWARD BIOS has been
customized by adding important, nonstandard, features such as virus and password
protection, power management, and detailed fine-tuning of the chipset which controls
the system. The remainder of this manual is intended to guide you through the process
of configuring your system using the BIOS Setup.
4.1
How To Enter BIOS Setup
The AWARD BIOS is immediately activated when you first turn on the computer. The
BIOS reads system configuration information in CMOS RAM and begins the process of
checking the system and configuring it through the power-on self test (POST). When
these preliminaries are completed, the BIOS searches for an operation system on the
data storage devices (hard drive, floppy drive, etc.). The BIOS launches the operating
system and hands over control of system operation to it.
To begin Setup, press the <Delete> key during boot-up before or while a message
similar to this appears briefly at the bottom of the screen during POST (Power On Self
Test):
Press DEL if you want to enter SETUP
If the above message disappears before you have responded and you still wish to enter
Setup, reboot the system to try again by pressing the “RESET” button on the system
case. You may also restart by simultaneously pressing the <Ctrl>, <Alt> and <Delete>
keys.
Press F1 to continue, DEL to enter SETUP
Summary of Contents for SL5598
Page 5: ...EASY INSTALLATION...
Page 9: ...2 FEATURES Photo Of The Motherboard...
Page 35: ...3 INSTALLATION...
