background image

 

 

 

WWW.GVISION-USA.COM 

30398 Esperanza Rancho Santa Margarita CA 92688   /   Tel. 949-586-3338   /   Fax. 949-272-4594   /   Email. info@gvision-usa.com 

3

 

 

 

Safety Precautions / Maintenance

 

 

Do not use this apparatus near water.

 

 

Clean only with dry cloth.

 

 

Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions. 

 

 

Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including 

amplifiers) that produce heat. 

 

 

Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades 

with one wider than the other. A grounding type plug 

has two blades and a third grounding prong. The wide 

blade or the third prong are provided for your safety. If 

the provided plug does not fit into your outlet, consult an 

electrician for replacement of the obsolete outlet. 

 

 

Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the 

point where they exit from the apparatus. 

 

 

Only use attachments/accessories specified by the 

manufacturer. 

 

 

Use only with the cart, stand, tripod, bracket, or table 

specified by the manufacturer, or sold with the 

apparatus. When a cart is used, use caution when 

moving the monitor combination to avoid injury from tip-

over. 

 

 

Unplug  the monitor  during lightning storms or when 

unused for long periods of time. 

 

 

Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 

damaged in any way, such as power-supply cord or 

plug is damaged, liquid has been spilled or objects have 

fallen into the apparatus, the monitor has been exposed 

to rain or moisture, does not operate normally, or has 

been dropped. 

 

 

Do not press strongly upon the panel with a hand or a 

sharp object such as a nail, pencil, or pen, or make a 

scratch on it. 

 

 

Do not stick metal objects or any other conductive 

material into the power cord. Do not touch the end of 

the power cord while it is plugged in. 

 

 

Keep the packing anti-moisture material or vinyl 

packing out of the reach of children. Anti-moisture 

material is harmful if swallowed. If swallowed, induce 

vomiting and go to the nearest hospital. Additionally, 

vinyl packing can cause suffocation. Keep it out of the 

reach of children. 

 

 

Concerning the Power Cord (Can differ by country): 

Check the specification page of this owner’s manual to 

be certain concerning current requirements. Do not 

connect too many devices to the same AC power outlet 

as this could result in fire or electric shock. Do not 

overload wall outlets. Overloaded wall outlets, loose or 

damaged wall outlets, extension cords, frayed power 

cords, or damaged or cracked wire insulation are 

dangerous. Any of these conditions could result in 

electric shock or fire. Periodically examine the cord of 

your device, and if its appearance indicates damage or

  

deterioration, unplug it, discontinue use of the device, 

and have the cord replaced with an exact replacement 

part by an authorized servicer. Protect the power cord 

from physical or  mechanical abuse, such as being 

twisted, kinked, pinched, closed in a door, or walked 

upon. Pay particular attention to plugs, wall outlets, and 

the point where the cord exits the device. Do not move 

the monitor with the power cord plugged in. Do not use 

a damaged or loose power cord. Be sure do grasp the 

plug when unplugging the power cord. Do not pull on 

the power cord to unplug the monitor. 

 

 

To reduce the risk of fire or electrical shock, do not 

expose this product to rain, moisture or other liquids. Do 

not touch the screen with wet hands. Do not install this 

product near flammable objects such as gasoline or 

candles, or expose the TV to direct air conditioning. 

 

 

Do not use high voltage electrical equipment near the 

TV (e.g., a bug zapper). This may result in product 

malfunction. 

 

 

Do not expose to dripping or splashing and do not place 

objects filled with liquids, such as vases, cups, etc. on 

or over the apparatus (e.g., on shelves above the unit). 

 

 

Do not attempt to modify this product in any way without 

written authorization from GVISION. Unauthorized 

modification could void the user’s authority to operate 

this product. 

 

 

Moving

: Make sure the product is turned off, unplugged, 

and all cables have been removed. Do not press or put 

stress on the front panel of the monitor screen. 

 

 

If you smell smoke or other odors coming from the 

monitor screen, unplug the power cord and contact an 

authorized service center. 

 

 

If water or another substance enters the product (like an 

AC adapter, power cord, or display unit), disconnect the 

power cord and contact the service center immediately. 

Otherwise, this may result in fire or electric shock. 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for I32ZI-OD-45P0













Reviews: