GVS K-BUS
○
R
KNX/EIB
Thermostat
www.video-star.com.cn
marketing@video-star.com.cn
Tel.
：
（
8620
）
39338986
Fax.
：（
8620
）
39338465
53
4.10 Parameter window "Logic"
Parameter window "Logic" shows in Figure 4.10.1 Temperature controller provides two logic
functions, each function has three logic inputs, each input can be freely set, telegrams may be sent by
the temperature threshold (1bit), or humidity threshold (1bit), or from the bus, these telegrams can also
be inverted, then participate in logic operations.
Figure 4.10.1 Parameter window "Logic"
Parameter "Active logic function"
Options: enable
disable
Here is to set whether to enable logic functions.
Parameter "logic1"
Parameter "logic 2"
Options: enable
disable
This parameter sets whether to enable logic 1 and logic 2.
If select "enable", it means logic 1 and logic 2 are enabled, and their parameter window can be seen
in Figure 4.10.2.
Parameter "The value of communication object input A after bus voltage recovery"
