GVS K-BUS
○
R
KNX/EIB
Thermostat
www.video-star.com.cn
marketing@video-star.com.cn
Tel.
：
（
8620
）
39338986
Fax.
：（
8620
）
39338465
54
Parameter "The value of communication object input B after bus voltage recovery"
Options: 0
1
This parameter sets logic values of "Input A" and "Input B", when the bus on a power-on reset.
"Input A" and "Input B" logic values can be changed via the communication object "communication
object logic Input A" and "communication object logic Input B".
In Figure 4.10.2, in the parameter window of logic1 and the logic 2, “Input 1" and "Input 2" for the
first run logic operation, and the operation result is then runs logical operation with"Input3", at last the
final logical result is obtained, according to the final results two different types of data transmission can
be achieved. When the final logic result is "1", user can specify the values of two different types of
transmission on the bus; when the final result is "0"; user may further specify two different types of
transmission on the bus. Each time the Thermostat detects the input of new logical values, it will re-do a
logic operation, while updating the final result of logic operation. Logic functions can also set ways of
sending the value of logical objects; user can disable / enable logic functions.
Figure 4.10.2 Parameter window "Logic 1/2"
Parameter "input X(X=1…6)"
