GVS K-BUS
○
R
KNX/EIB
Thermostat
www.video-star.com.cn
marketing@video-star.com.cn
Tel.
：
（
8620
）
39338986
Fax.
：（
8620
）
39338465
8
air temperature.
2
．
Should not be installed in direct sunlight and away from a strong vibration, electromagnetic
interference are, Its location should avoid breaking the appearance and integrity of the building, installed
with a outdoor weatherproof shield.
3
．
As far as possible away from door, window, and air vents. If impossible, the distance should not
less than 2m;
4
．
Try to avoid using environment in the dusty environment and installing in poorly ventilated place.
5
．
Avoid working in extreme conditions and chemical vapors, otherwise it will cause inaccurate
readings of Thermostat.
2.3 Button operation instruction
LCD display: the current temperature, setting temperature, the heating and cooling, working mode,
wind speed, weeks time, timing marks, relative humidity
Button on the circuit board from left to right: mode key, increasing key, reducing key, wind speed
key, timing button and power button underneath.
Power button: the power button is used for the switch display.Just on electricity, Thermostat
LCD screen does not display anything until you press the power button on screen.At this point the
pattern, temperature, refrigeration and heating and time on the screen can be set by buttons.
Mode button: mainly used to switch four kinds of room temperature control modes. the icons
