GW Instek APS-1102A User Manual Download

Page: 279 / 285

SPECIFICATIONS

APS-1102A

9-13

9.10 General

a) LCD settings

Contrast:

Adjustable

Display color:

White background or Blue background

b) Beep sound

On or off

When the setting is on and a key input error or other operation

error occurs, a beep sound will be output. When a protection

function-related error occurs, an alarm sound will be output

regardless of the beep sound setting.

c) Keylock

On or off

When the setting is on, only the keylock off operation and the

output off operation are enabled.

d) Output setting at power-on

On or off

When the setting is on, the output is automatically set to on at

power-on.

e) Reset function

This function resets all basic settings to their initial (factory)

settings.

f) Self test function

This function checks memory at power-on.

Summary of Contents for APS-1102A






























































































































































































































































































Search results

Summary of Contents for APS-1102A

Reviews:

Related manuals for APS-1102A

Brands by name

Popular brands

GW Instek APS-1102A, User Manual

Search results

Summary of Contents for APS-1102A

Reviews:

Related manuals for APS-1102A

Brands by name

Popular brands