OPERATION
49
Example
Irms
Min/Max
settings
F3
F4
Note
Setting the I rms level to 0.00 will disable OCP.
Setting I rms to 0A is dangerous.
I rms Delay Time
Settings
The Delay Time setting defines how long the I
rms measurement must be sustained for before
it is recognized. By default the I rms delay time
is turned off.
Load on
Irms
Limit
reached
Irms Limit Delay
I
Irms Limit
acknowledged,
protection triggered
T
Irms Limt
4.
Press
I
rms
and then press
DELAY[F2]
.
5.
Set the desired delay time with the scroll
wheel/keypad or with the F3 ~ F4 soft-keys.
The MAX and MIN soft-keys set the delay time
to the maximum and minimum, respectively.
Range
0(off) ~ 10 seconds
Soft-keys
MAX, MIN
6.
Press
Enter
to confirm the delay time setting.