APS-7000 Series User Manual
78
8.
The terminal display will return the following:
GWINSTEK,APS-7051, GEXXXXXXX,
XX.XX.XXXXXXXX
(manufacturer, model, serial number, software
version)
9.
If Realterm fails to connect to the APS-7000,
please check all the cables and settings and try
again.
Configure GPIB Interface - Optional
To use GPIB, the optional APS-001 GPIB interface card must first be
installed.
Note
The GPIB interface card (APS-001) must first be
installed before the GPIB interface can be used for
remote control. Please see page 28 for installation
details.
GPIB
Configuration
1.
Connect a GPIB cable from the
PC to the GPIB on the interface
card.
GPIB
2.
Press the
Menu
key. The Menu
setting will appear on the display.
Menu
3.
Use the scroll wheel to go to item 6,
GPIB
and
press
Enter
.
4.
If the GPIB card is installed successfully, the
Card Status
will show
Plugged in
.
5.
Go to the
Function Active
setting and turn the
GPIB port on.