GDM-8261A User Manual
156
Note
If the GDM-8261A is returned to the initial settings, a
reset is performed automatically (page 144) after exiting
the configuration menu.
Resetting the Ethernet card takes approximately 5 to 10
seconds.
The continuity icon (
/
) is used to indicate the status of
the Ethernet card after it has been reset:
/
(flashing): indicates that the Ethernet card is resetting
/
(flashing
→
turns off): indicates that the Ethernet
card has finished resetting.
/
(flashing
→
stays on): indicates that the Ethernet
card has finished resetting when the continuity function
is active (see page 38).
View Web Password Settings
Background
The web password is set to 123456 by default. Only the
on/off setting of the web password can be viewed with
the GDM-8261A. The web password can only be set
from the web control page, see page 159 for details.
1. Web Password
Configuration
1.
Press the Shift key, the 2nd
(Menu) key, and the Left key
repeatedly until the SET LAN
configuration menu appears.
Note: SET LAN will only be
available after LAN has been
activated in the I/O menu, see
page 142.
/ EXIT
SHIFT
2ND
MENU
HOLD
2.
Press the Down key and then
the Left key. The WEB PW
selection display appears.
HOLD
