REMOTE CONTROL
157
3.
Press the Down key. The WEB
PW ON/OFF selection appears.
4.
Press the Up/Down key to
select ON or OFF. When set to
ON a password is required to
enter the browser control page,
When set to OFF, a password is
not required to enter the
browser control page.
5.
Press the Enter key followed by
the Exit key to confirm the
settings and exit from the
configuration menu.
AUTO
ENTER
/ EXIT
SHIFT
Note
The web password is set to 123456 by default. Setting
INIT to YES will reset the password back to the default
password if the password has been forgotten.
Remote Terminal Session (Telnet)
Background
A terminal application can be used to remotely control
the GDM-8261A via the telnet protocol.
Operation
1.
Establish a connection via the
Ethernet port.
2.
Open a terminal program such as Hyper Terminal
and enter the IP address and port number of the
GDM-8261A.