REMOTE CONTROL
135
Configuration
1.
Press the Shift key, the 2nd
(Menu) key, the left key
repeatedly until the TX TERM
configuration menu appears.
/ EXIT
SHIFT
2ND
MENU
HOLD
2.
Press the Down key. The EOL
menu appears.
3.
Press the Down key. The EOL
selection menu appears.
4.
Press the Up/Down key to
select the EOL character.
5.
Press the Enter key followed by
the Exit key. The EOL setting is
stored and the display goes back
to the default display.
AUTO
ENTER
/ EXIT
SHIFT
Set the Separation Character
Description
The TX TERM configuration menu can set the
separation character for multiple return measurement
values, the GPIB’s separation character is fixed as a
comma. While the separation character for LAN can be
either CR+LF or a comma.
