16
C/R mode add a secondary factor’s unit
Ex: When C=1nF,R= .0045k ohm (C/R mode and display mode is VALUE)
1. Primary factor of test result (It doesn’t include Primary's unit).
LCR Meter response MAIN:PRIM 1.0000^END
ASCII CODE = 4D 41 49 4E 3A 50 52 49 4D 20 20 31 2E 30 30 30 30 0A (Hex format)
Positive symbol
2. Secondary factor and unit
LCR Meter response MAIN:SECO .0045nFk^END Secondary factor’s unit
ASCII CODE = 4D 41 49 4E 3A 53 45 43 4F 20 20 2E 30 30 34 35 6E 46 6B 0A (Hex format)
Positive symbol Primary factor’s unit
Ex: When C=1nF,R= .0045 ohm (C/R mode and display mode is VALUE)
1. Primary factor of test result ( It doesn’t include Primary's unit).
LCR Meter response MAIN:PRIM 1.0000^END
ASCII CODE = 4D 41 49 4E 3A 50 52 49 4D 20 20 31 2E 30 30 30 30 0A (Hex format)
Positive symbol
2. Secondary factor and unit
LCR Meter response MAIN:SECO .0045nF ^END Secondary factor’s unit
ASCII CODE = 4D 41 49 4E 3A 53 45 43 4F 20 20 2E 30 30 34 35 6E 46 20 0A (Hex format)
Positive symbol Primary factor’s unit