Rev: 4.5/15/12
Brush Master™ Chipper/Shredder with 2-Way Feed
2
T
Training
1. Read, understand, and follow all instructions on the
machine and in the manual before attempting to
assemble and operate. Keep this manual in a safe
place for future and regular reference and for
ordering replacement parts.
2. Be familiar with all controls and their proper
operation. Know how to stop the machine and
disengage controls quickly.
3. Never allow children under 18 years old to operate
this machine. Children 18 years old and over should
read and understand the operation instructions and
safety rules in this manual and should be trained and
supervised by a parent.
4. Never allow adults to operate this machine without
proper instruction.
5. Keep bystanders, helpers, pets, and children at least
75 feet from the machine while it is in operation. Stop
machine if anyone enters the area.
6. Never run an engine indoors or in a poorly ventilated
area. Engine exhaust contains carbon monoxide, an
odorless and deadly gas.
7. Do not put hands or feet near rotating parts or in the
feeding chambers and discharge opening. Contact
with the rotating impeller can amputate fingers,
hands, and feet.
8. Never attempt to unclog either the feed intake or
discharge opening, or inspect and repair the machine
while the engine is running. Shut the engine off and
wait until all moving parts have come to a complete
stop. Disconnect the spark plug wire and ground it
against the engine.
Chipper/Shredder Model # Specifications
Model #
CH6
CH8
Maximum RPM
3600 RPM
3600 RPM
Torque
8 Ft Lbs
12 Ft Lbs
Emission Compliance
48 state
48 state
Fuel Capacity (gal.)
0.9
1.3
Engine Type
DEK
DEK
Displacement (cc)
208 cc
270 cc
Chipper
Yes
Yes
Shredder Yes
Yes
Maximum Cutting
Thickness Diameter (in.)
2.25” 3”
Oil Capacity (Qts)
0.6
1.1
Warnings
Product Specifications
NOTE:
The operator or
user is
responsible for
accidents or
hazards
occurring to other
people, their
property, and
themselves.
