3
Specifications
DC Volts ........................................3 Ranges ............ 1 mV to 50V
AC Volts (True RMS) .....................3 Ranges ............ 1 mV to 50V
AC Volts Peak to Peak .................3 Ranges ............ 1 mV to 50V
Low Amps DC ..............................2 Ranges ..........10 mA to 17A
Low Amps AC (True RMS) ............2 Ranges ..........10 mA to 17A
Low Amps AC Peak to Peak ........2 Ranges ..........10 mA to 17A
High Amps DC ................................1 Range .............1 A to 600A
High Amps AC (True RMS) .............1 Range .............1 A to 600A
High Amps AC Peak to Peak .........1 Range ..............1A to 600A
Ohms ............................................5 Ranges ...........1
Ω
to 40M
Ω
Continuity ........................ Beeper/Bargraph ................ .0 - 100
Ω
Diode Volts .....................................1 Range .......0 to 1.999 Volts
Frequency .....................................5 Ranges ...............0 to 2KHz
Pulse Width (Up or Down) ............2 Ranges .......0 mS to 200mS
RPM Inductive ........................ 2 or 4 Stroke .....0 to 10,000 RPM
Fuel Pump RPM ...........................4 Ranges ........................RPM
Dwell Milliseconds ..........................1 Range ..............0 to 100%
Peak Amps .....................................1 Range ....... 0 to 20.0 Amps
Build Time ......................................1 Range .......... 0 - 200 mSec
Drive Time ......................................1 Range .......... 0 - 200 mSec
KiloVolts (Optional) .........................1 Range .............. 0 - 40.0 kV
Operating Temp .......................... 0° to 45°C ...........32° to 120° F
Storage Temp ..........................-20° to 60°C ......... -20° to 140° F
Case Size ................................ 21x10x5 cm ....... 10x16.5x9.5 in.
Lead Length .......................................1.8 m ......................6 Feet
Weight ................................................655 g ............. 1.6 Pounds
Power Requirements 1, Internal 9 V Battery Optional Second 9V
Displays ............................................ Backlit ..... 4 and 3 1/2 Digit
.................................................... Bar Graph ............ 31 Segment
Input Impedance .............. High Impedance ............ 10 Megohm
PC Interface ...................................... RS232 w/ Optional Software
Extreme Static Discharge
In the event that the analyzer is exposed to an extreme static
discharge, readings may appear to freeze. Although the until will
not be damaged by static, you may need to press any function
key to restart measurements.
