- 30 -
charging base and connect to the external power supply of DC 5V/2A. The indicating light stays in
yellow while charging and it turns to green when charged.
6 CLEANING AND DISINFECTION
The plastic shell parts of AI center, charging base, cane and nodes can be washed with a cotton swab,
neutral detergent and clean water. Do not use sharp tools such as toothpicks, tweezers, and knives for
cleaning. Dry it with a clean, soft cotton swab. Do not use corrosive solutions to wipe or clean.
The fabric, PU leather and buckle parts of the strap can be washed with a brush, detergent and clean
water. The metal part of the strap should never be submerged in water to avoid corrosion, it can be
wiped and cleaned with antibacterial tissue or cotton cloth soaked with alcohol.
Remove the hand strap and wash it with a mild detergent, then rinse it off.
7 MAINTENANCE
The device consists of sophisticated mechanical parts. Performance and service life of this device may
be significantly reduced if under long-term magnetic interference.
Power off the device after using.
Any part of the device is not waterproof, do not splash water on it or submerge it into water washed or
drenched.
Do not place or store the device near fire or heat articles.
The device should be cleaned in time after use.
Please avoid dropping or impacting the device at any time.
Do not forcefully pull, press or twist the unit or components.
The device should be charged in time. It should be fully charged and stored when it’s not in use for a
long time. It should be charged every one to two months and stored in a cool or dry environment in
order to avoid moisture and exposure.
8 TROUBLESHOOTING
PROBLEMS
Possible Causes and Troubleshooting
Unable to bind with APP
1
.
The network signal is weak.
Please move to a place where the signal is strong and try again.