GYM form SLIM FOLD, Instruction Manual

8

1m = 3,28 feet

any other symptoms. 

-  If you have not done exercise for 

a long time or if you have a heart 

condition, a circulatory disorder or 

an orthopaedic problem, consult a 

physician before using the device. 

- This device is not designed 

for use by children or persons 

with reduced mental or physical 

capabilities unless they are 

supervised or instructed by 

someone responsible for their 

safety.  

- Children should be supervised 

at all times to ensure they do not 

play with the device. 

- Do not use the device if you 

weigh more than 110 kg. 

- This device is designed for 

individual use. Any breakdown 

caused by improper use is not 

covered by the warranty. 

- Make sure the device is on a 

flat surface. Do not use dangling 

clothing on the treadmill and do 

not scuff the treadmill, as this will 

make it difficult to use. Wear sport 

shoes when using the treadmill. 

Do not start the treadmill while 

standing on it. The best position 

when turning on the device is to 

stand with one foot on either side 

of the treadmill. If the initial speed 

of the treadmill is too fast, do not 

jump on the treadmill. Start using 

it at a lower speed and increase it 

gradually. 

-  Do not suddenly stop walking or 

running on the treadmill. Press the 

ON/OFF button and the treadmill 

will gradually stop. 

-  Stop walking when the treadmill 

stops.

-  Leave a safety area of 2 metres 

by 1 metre behind the treadmill.

PRECAUTION: DO NOT remove 

the cover of the control panel, 

as this may cause an electric 

shock. The parts inside cannot 

be repaired by the user.

Product description

1. Control  panel

2. Emergency  key

3. Base 

4. Treadmill

5. Vertical bar screw

6. Handlebars

7. Lock  screw

8. Control panel screw

9. ON/OFF  button

10. MODE button

11.  button

12. ↓ button

13. ↑ button

14. Function indicators

15. 

Small Allen key

16. 

Wheels

17. Vertical bars

18. Metal base

19. Base extension 

20. Washers x 6

21. Screws x 6

22. Handlebar  cable

23. Vertical bar cable

24. Screws x 2

25. Nuts x 2

26. Handlebar  screws

27. Spanner

28. Pulse  sensors

29. Belt  screws

Assembly Instructions

1.  Open the box, unpack all the parts 

and take out the treadmill.

INSTALLING THE METAL BASE (See 

Picture 6)

2. Place the treadmill in the upright 

position on a flat surface. 

3. Make sure that the screw on the 

vertical bar (5) is in place and is attaching 

the base (3) to the vertical bar (17).

4.  Attach the base extension (19) to the 

metal base (18) with six washers (20) and 

six screws (21) and the large Allen key 

(15). 

INSTALLING THE HANDLEBARS (See 

Picture 7)

5.  Remove the screw on the vertical bar 

(5) that is connecting the base (3) to the 

vertical bar (17).

6.  Gradually lower the base (3) until it is 

resting on the floor. 

7.  Connect the handlebar cable (22) to 

the vertical bar cable (23). See Picture 7.

8.  Place the handlebars (6) on top of the