Troubleshooting
Test the relay wiring to the magnet lock
Once you have finished the wiring, you should test if the wiring is correct and working by using a
paperclip. Do this before plugging the connector into the GateKeeper socket.
Find a paperclip, straighten it and then bend it as depicted below. Connect the paperclip into the
two holes where the two wires connect to the magnet lock. You should be able to see the door lock
activate or deactivate, depending on the type of lock.
EPIC Sanctuary
78-106 Manchester St
Christchurch 8011
New Zealand
PO Box 13352
Armagh Mail Centre
Christchurch 8011
New Zealand
NZ 03 974 9169
AU 03 9111 0323
US 415 678 1270
Page 15
