GYMFORM Leg Action, Instruction Manual

8

8. It is not possible to set the time or speed on 

automatic programmes.

9. If you choose one of the two manual 

programmes (M0 and M1), you can set a time of 

1 to 10 minutes before starting the programme. 

• Press the Less Time button (T-) (11) on the 

remote control or the - button on the unit (20) to 

reduce the time.

• Press the More Time button (T+) (10) on the 

remote control or the + button on the unit (21) to 

increase the time.

10. Once you have chosen the time, press 

the Start/Stop button 

  (9) on the remote 

control or the Start button    (19) on the device 

to start the programme. When the programme 

begins, you can set the speed (from 1 to 15) at 

any time.

• Press the More Speed button (S+) (12) to 

increase the speed.

• Press the Less Speed button (S-) (13) to 

reduce the speed.

11. To turn off the device, first press the Start/

Stop button

  (9) on the remote control or the 

stop  button  on  the  device  ฀  (17).  Then  press 

the ON/OFF button on the device to turn it 

completely off.

12. Disconnect the device from the mains after 

use.

Positions for using the device:

The device can also be used on the legs and 

back. Consult the exercise guide on how to use 

the product. 

NOTE: Never apply all your weight on the 

device, as this may damage it.

CLEANING

Always unplug the device from the mains before 

cleaning it.

Wipe the device and foot pads (4) with a damp 

cloth and mild soap. Do not use abrasive 

or corrosive cleaners. The foot pads can be 

removed for easy cleaning (4).

TECHNICAL SPECIFICATIONS

Input: 24 V 

Power: 30 W

Adapter Technical Specifications

Input: 100-240 V 

Output 24 V 

 1.5 A

AUSTRALIA & NEW ZEALAND ONLY

This product has the benefit of certain Consumer 

Guarantees. These are prescribed by the 

Australian Consumer Law & the New Zealand 

Consumer Guarantees Act 1993 both of which 

provide protection for consumers.  There is no 

express warranty for this product in Australia or 

New Zealand.  The above paragraph refers to 

other countries.

WARRANTY

This product is covered by a warranty against 

manufacturing defects subject to the time 

periods stipulated by the legislation in force in 

each country.

ATTENTION

DISPOSAL OF MATERIALS

 A symbol of a crossed-out wheeled bin 

means  you  should  find  out  about  and 

follow local regulations about disposing of 

this kind of products.  

Do not dispose of this product as you would 

other household waste. 

Dispose of this device in accordance with the 

corresponding local regulations.

Electrical and electronic devices contain 

hazardous substances that can have harmful 

effects on the environment and/or human health 

and should be recycled properly.

Made in China.