D
D
H
H
H
A
E
T
F
T
STEP 7
Find the metal plate under the Bike Cushion (D) se the Allen Wrench (L) to take out bolt and
washer of the Adjusting Knob (H). Slot the Adjusting Knob (H) into the groove of the metal plate.
Align the screw holes and use Allen Wrench (L) to fix into place.
the Left pedal (F) counter-clockwise
onto the Left crank
and the Right pedal (E)
clockwise onto the Right crank
.
STEP 9
If the Office Bike is not steady, turn the Adjustable
Leveler ( ) on both sides until even.
Check all of screws are tightened.
Your bike is complete!
STEP 8
Identify the Left Pedal marked with “L” (F). Align
the pedal with the hole on the left
crank arm
from
the Main Frame (A). Place the pedal screw through
the hole and tighten with the Spanner (K).
Then tighten the Pedal (
F
) and Nut (T) with Big
Spaner (M).
Repeat for the Right Pedal marked with “R” (E).
Note!
