8
GB4.0 EXERCISE BIKE
ASSEMBLY INSTRUCTIONS
STEP 1. Front and Rear Stabilizers Installation
A.Position two Foot Pad(73) onto the Front Stabilizer (2).
B.Position two Foot Pad(73) onto the Rear Stabilizer (26).
C. Position the Front Stabilizer (2) in front of the Main Frame (1) and align bolt holes.
Attach the Front Stabilizer (2) onto the front of the Main Frame (1) with two M8x50 Bolts (28)
,
two
Big Washers Ø8xØ16x1.5 (15).
D. Position the Rear Stabilizer (26) behind the Main Frame (1) and align bolt holes.
Attach the Rear Stabilizer (26) onto the rear of the Main Frame (1) with two M8x50 Bolts (28)
,
two
Big Washers Ø8xØ16x1.5 (15).
STEP 2. Foot Pedals Installation
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for Right and“L” for Left.
Insert the pedal shaft of Left Foot Pedal (30) into threaded hole in the Belt Pulley with Left Crank
(70). Turn the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the threads.
Screwdriver provided Insert pedal shaft of Right Foot Pedal (31) into threaded hole in the Belt
Pulley withRight Crank (71). Turn the pedal shaft by hand in the clockwise direction until snug.
