9
GB8.0 EXERCISE BIKE
Handlebar Post, Handlebar Post Cover and tension knob Installation.
Remove Six M8x15 Bolts (26), Four Ø8xØ20x2.0 Big Washers (27) and two Ø8x Ø20x2.0 Big curve
Washer(12) from the Main Frame (1).
Slide the bottle (43) down to the bottle holder (42). Slide the Console cover (44) up to the handlebar Post (2)
according to the direction of the diagram. Slide the bottle holder (42) up to Handlebar Post (2) according to
the direction of the diagram.
Connect the Sensor Wire (46) from the Main Frame (1) to the Computer Extension Wire (37) from the Hand
-
lebar Post (2). Insert the Handlebar Post (2) onto the tube of the Main Frame (1) and secure with Six M8x15
Bolts (26), Four Ø8xØ20x2.0 Big Washers (27) and two Ø8x Ø20x2.0 Big curve Washer(12) that were
removed.
STEP 4