background image

28

GT4.0 TREADMILL

IMPLIED WARRANTY

The importer of this product assures that this device is manufactured with high quality materials.

The prerequisite for the implied warranty is the proper setup in accordance with the operating instructions. 

Improper use and /or incorrect transportation can void the warranty.

The implied warranty for wear parts is valid for 1 year and for frame 3 years, beginning from the date of 

purchase. For eventual defects please contact the dealer of this product within the guarantee period.

The warranty applies to the following parts (as far as included in the scope of delivery): frame, electronic 

devices, wheels and running belt.

The guarantee does not cover:

• Damage effected by outer force
• Intervention by unauthorized parties

• Incorrect handling of the product
• Non-compliance of the operating instructions
• Normal wear and tear of the wear parts

The device is intended only for home use.

Manufactured for:

Gymstick International Oy

Ratavartijankatu 11

15170 Lahti, FINLAND

Devices marked with this symbol must be disposed of separately from your household waste, as they contain valuab

-

le materials which can be recycled. Proper disposal protects the environment and human health. Your local authority 

or retailer can provide information on the matter.

Summary of Contents for GT7.0





























Reviews: