Gymstick PRO FTR, User Manual

5

ASSEMBLY INSTRUCTION

1. PREPARATION:

A. Before assembling make sure that you will have enough space around the item.

B. Use the present tooling for assembling.

C. Before assembling please check whether all needed parts are available (at the above of this 

instruction sheet you will find an explosion drawing with all single parts (marked with numbers) 

which this item consists of.

Attach the Front Stabilizer (15) to the Main Frame 

(16) using two sets of Ø10 Flat Washers (5) and 

bolt (3). 

Attach the Rear Stabilizer (4) to the Main Frame 

(16) using two sets of Ø10 Flat Washers (5) and 

bolt (3).

Pull out the Nut (83) and then Slide the Vertical 

Seat Post (10) into the seat post housing on the 

main frame (16) with the adjustment knob (42).

Then release the round nut (19) and slide the 

Seat Post (12) into the Vertical Seat Post (10). 

Then Secure using fixing knob (19). You will have 

to slacken the knurled section of the Adjustment 

Knob (42) and pull the knob back and then select  

the desired height. Release the knob and retight-

en the knurled portion.

Now fix the Seat (13) to the Seat Post (12) as 

shown, and tighten the bolts.

2. ASSEMBLY INSTRUCTION: