17
Running Belt Adjustment
1, It’s suggested to switch off the power for 10 minutes after keep running 2 hours, so that it’s good for maintain
the treadmill.
2, To avoid the mat from slipping during running, the belt should be not too loose; for avoiding the more abrasion
between the roller and belt and maintain the machine’s good running the belt should be not too tight. You can
adjust the distance between deck and belt, the belt should be away from the deck about 50-75mm on both sides.
Center the Running Belt
Place treadmill on a level surface. Run
Treadmill at approximately 6-8KM/H,
checking the running condition.
If the belt has drifted to the right, turn
the right adjusting bolt 1/4 turn
clockwise, then start running until
centering the belt. Pic. A
If the belt has drifted to the left, turn the
left adjusting bolt 1/4 turn clockwise,
then start running until centering the
belt .Pic B
Timely adjust the tightness of the belt,
if need, turn the left and right adjusting
bolt 1/4 turn clockwise ,then re-start
running, confirm the belt-tightness until
the belt be right tightness. Pic C
Pic B
图
A
C
Summary of Contents for RUN 3.0
Page 1: ...1 RUN 3 0 TREADMILL USER MANUAL...
Page 18: ...18 Exploded Diagram...