14
15
10
.
Calibration and Alarms
Calibration
When in Balance Mode, if the T581 moves forward or backward on its own on
fl
at ground, it needs to be
calibrated if the problem persists, please contact after-sales service.
To Calibrate the Warrior T581
Con
fi
rm that the hoverboard is in the o
ff
state and keep both side of the pedals parallel to the horizontal plane.
Make sure the hoverboard is turned o
ff, press and hold the power switch for 5 seconds and then release it. When
you hear a sound, the system starts to calibrate;
the red light (that is, the running indicator and the left turn indicator)
fl
ashes 3 times. Wait until the red light is
on, the system calibration is complete, and you can cycle
when you turn it o
ff
and on again.
Self-balance
App adjustment: conversion of self-balance and not self-balance on app.
Manual adjustment: Place the car horizontally - make sure the T581 is turned on,press the power switch for
about 6 seconds, until you hear the beep, then restart the hoverboard, the adjustment complete.
Child mode/ Adult mode
App adjustment: conversion of adult mode and child mode on app.
Manual adjustment: Stand up the T581, press the power button to turn it on - release the button - then keep
press. The button remains for about 6 seconds until the beep is heard and the balance hoverboard is restarted.
Complete child mode switching.
Alarm
a. Overheating Riding for an extended period of time could increase the internal temperature of your T581 in
excess of 122°F(50
º
C). If this happens, the glow lights will
fl
ash red, an alarm will sound and your T581 will not
be able to charge. Simply step o
ff
the T581, power them o
ff
, and give them time to cool back down to a normal
operating temperature
b. Speeding riding will cause a lift alarm, please note the speed you set in the app.
c. Other alarms
For any other alarms, try restarting your T581. If the problem persists, please contact after-sales service.
11. About app
1
1
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
10
11
Click the Bluetooth icon to open the bluetooth and enter
the Bluetooth link
Show the speed of the hoverboard.
Battery reminder (now it shows the battery empty)
Click this button to enter the switch and warning page.
Click this button to enter light color change page
Click this button to enter model adjustment and speed
control page.
Search the bluetooth of the hoverboard.
Click this button to control the switch machine
Open this function when you need to left hoverboard for
a while, it will warning
Fault Analyse help you to
fi
nd the problem of the
hoverboard.
Light color control page.
10
11
Home
Bluetooth Connection
Analysis and warning
Color Adjustment
Settings
