Gyros S032G, Using Instruction

Flying your helicopter

When the right control lever (steering rudder) is 

pushed up, the helicopter will move forward.

When the right control lever (steering rudder) is 

pushed down, the helicopter will move backward.

 If the helicopter is turning 

excessively clockwise, rotate this 

calibration button anticlockwise 

until the helicopter is balanced.

If the helicopter is turning 

excessively anticlockwise, rotate 

this calibration button clockwise 

until the helicopter is balanced.

The helicopter has 

two flight modes: 

slow (default mode) 

and fast. Press the 

switch to change 

between modes.

A-B Frequency switch: 

Two helicopter can be

 used in the same area, 

by using two different 

frequencies.

Push the rudder stick toward right to

turn clockwise

Push the rudder stick toward left to

turn counter clockwise.

When you pull down the left

stick(throttle) the speed of the

main rotor blade will decrease

and the helicopter will go down.

When you push up the left

stick(throttle) the speed of the

main rotor blade will increase

and the helicopter will go up.