![background image](http://html1.mh-extra.com/html/gys/029422/029422_manual_2280774009.webp)
9
GYSFLASH 4.12
EN
TROUBLESHOOTING
Symptoms
Causes
Remedies
1 The indicator
blinks.
• Polarity inversion
• Battery voltage is too high
• Clamps in short-circuit
• Check that the clamps are properly connected.
• Check that it is a 12V battery.
2 The indicator
is on.
Charge failure, battery non recoverable. Change the battery and press
to restart a
charge.
3
The indicator
stays on even after pres-
sing the
button.
Thermal protection.
Ambient temperature is too high (>50°C), cool the
room and let the charger cool down.
4 The indicator blinks.
Charger in sleep mode.
Press the button
or connect a battery to the
charger to exit sleep mode.
5 The indicator stays on.
Charge interrupted by pressing the
button.
Press
again to restart the charge.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported