12
PSW 601 W / 1002 W / 1502 W - 12 V /
2002 W - 12 V / 2002 W - 24 V
EN
Translation of the original instructions
12
Connection
The monitoring remote control must be connected to the converter when it is not energised.
1. Connect the remote control to the converter (1).
The remote control can be fixed once the connection has been established.
On / Off button
The remote control allows the converter to be controlled remotely (max. 5 m).
The On/Off function of the remote control only works if the main switch of the converter is
set to Off.
1. Press the button (2) for a long time (> 3 s). The converter lights up, the Power LED turns green.
2. Repeat the same operation to switch off the inverter.
Digital display
(remote control PSW 1002W / 1502W / 2002W)
- The “INPUT DISPLAY” screen gives information about the battery voltage.
- The “OUTPUT DISPLAY” screen informs about the power consumption of the device connected to the converter.
A simple press of the button (2) switches between the two displays.
Indicators
The green indicator is the power indicator. The red indicator indicates a fault :
F01
F02
F03
F04
F05
Low volt
Over volt
Over load
Over temp
Output short-circuit
PROTECT FUNCTION AND RESTART WORK METHOD
Function
State description
Restart work method
LED light
alarm
AC output
Input low
voltage alarm
Green : on
Red : off
Alarm
AC have output
When the voltage of the batter return to the
related voltage, alarm stop automatically.
Input low
voltage shut down
Green : on
Red : on
Alarm
No AC output
When the voltage of the batter return to
the related voltage the inverter will restart
work, green light on, red light off.
Input over
voltage protection
Green : on
Red : on
Alarm
No AC output
When the voltage of the batter return to
the related voltage the inverter will restart
work, green light on, red light off.
Over load
protection
Green : on
Red : on
Alarm
No AC output
Reduce the load to related rang the inverter
will restart work, green light on, red light off.
Over temperature
shut down
Green : on
Red : on
Alarm
No AC output
When the inside temperature return to rela-
ted rang, inverter will restart work, green
light on ,red light off.
Output short
circuit
Green : on
Red : on
Alarm
No AC output
When short circuit stopped, inverter restart
to work automatically.
