18
Inverter 70
24 HF
The display shows:
« OUt »
+ The warning LED
illuminates
The battery is in short circuit
or damaged.
Replace the battery
Voltage LED is flashing
Inverter 70-24 has detected
a different voltage than the
one selected
Press STOP to change the
voltage.
Press START for 3 seconds
to confirm the voltage
initially selected.
The display shows:
« FUS »
+ a warning beep sounds
+ the warning LED illuminates
The fuses have blown
Change the internal fuse
(qualified staff only)
(ref.054651)
The charger displays nothing
+ the warning LED illuminates
Electrical network fault
Check the voltage of the
electrical network is
between 100 and 240V
Ventilation holes blocked.
Check and clear ventilation
holes
The display shows:
« tHI »
Faulty fan.
Contact your retailer
A warning beep sounds
+ The warning LED
illuminates
+ the display shows :
Inverter 70HF detects a
polarity reversal in the
clamps.
Connect the red clamp to
the "+" terminal, and the
black clamp to the "-"
terminal
The display shows:
« dIA »
and flashes
The charger cannot detect a
battery
Ensure the battery terminals
are clean, and the clamps
are securely connected
The display shows :
« HI »
+ beep
Excessive consumption
compared to the charger
capacity
Switch off some electrical
consumers to lower the
consumption.
The display shows :
« FUS »
+ a warning beep sounds
+ the warning LED illuminates
The fuses have blown
Change the internal fuse
(qualified staff only)
(ref.054554: 40A)
(ref :054651:80A)
The charger does not display
anything
+ the warning LED is
illuminated
+ warning beep sounds twice
Electrical network fault
Check the voltage of the
electrical network is
between 100 and 240V
Ventilation holes blocked
Check and clear ventilation
holes
D
IA
G
N
O
The display shows:
« tHI »
Faulty fan
Contact your retailer
