20
The other files are restricted to Car Manufacturer defined welding spots. It is possible to import downloaded Car
manufacturer files from the GYS website (http://www.gys.fr). It is not possible to add, edit or delete a welding spot saved in
a Car Manufacturer file.
4.1/ Import a Car Manufacturer welding spot file
Double click in the first column and highlight a car manufacturer name.
Then, double click in the second column to select a Car Manufacturer file previously downloaded from our website.
The list of welding spots defined by the Car Manufacturer are displayed in the second table below. Select a programmed
welding spot in order to display the welding spot profile on the screen.
4.2/ Add a programmed welding spot in the USER file
In order to add a welding spot in the USER file, select the USER file in the list of files and then click on the button
on
the right of the table below. Enter the name of the welding spot, and then press the TAB key or click outside the list
programmed welding spots in order to program the welding parameters.
To program a welding spot, it is possible to select :
The prespot tightening duration
The preheating current and duration
The parameters of the pulses (up to 4 maximum), with pulse ramp-up time, current and duration. Inter pulse parameters
can also be selected.
The current and duration of the forgeing stages (hot and cold) can also be selected.
In order to modify the parameters, click on the buttons
When the user changes a parameter, the chronogram of the welding spot profile is updated.
To validate the programmed welding spot, click on the button
.
