11
ENGLISH
INSTRUCTION MANUAL
Introduction
To get the most out of your new welding machine,
please read this manual and the safety instructions
before use. Please also save the instructions in case
you need to refer to them at a later date.
Technical data
Voltage/frequency:
230 V ~ 50 Hz
Max. current:
125 A
Continuous current:
10-85 A
Electrode size:
1.6-2.5 mm
Weight:
2.8 kg
Suitable for 1.5-5.0 mm steel
Quick start, anti-electrode burn-on function
Comes in a practical case, with welding screen
and slag hammer
Main components
1. Welding screen
2. Carrying strap
3. Cables
4. Electrode holder
5. Earth clamp
6. Slag hammer with steel brush
7. Potentiometer
8. Current diode
9. Overload diode
10. Jack, positive polarity
11. Jack, negative polarity
Special safety instructions
Place the machine on a flat surface. Never use
in dusty or dirty surroundings. NEVER use the
machine when carrying it by the strap!
Never use in wet or damp conditions!
