background image

14 

 

 

means that the circuit is open and the oil automatically returns to the 

tank (there is no pressure in the circuit).. 

 

  DEACTIVATION 

 

Any equipment that appears damaged in any way, does not operate normally, or has missing parts should be taken out of 
service immediately by removing the power cord from the electrical outlet. Do not use the unit if you notice parts are broken, 

bent or cracked.  

 

  START-UP 

 

The  QUICK  LIFT  must  be  disposed  of  in  accordance  with  the current environmental and disposal guidelines of the 

country in which it is located. 

 

  WARRANTY CONDITIONS 

 

The warranty covers any defect or manufacturing defect for 2 years from the date of purchase (parts and labor). - 

The warranty does not cover incidents due to misuse, fall, disassembly or other damage due to transportation. The 

warranty does not cover normal wear and tear of parts if maintenance is not kept up to date. Only spare parts from 

the manufacturer may be used to repair the QUICK LIFT. 

 

The characteristics of maximum load appear on the labels sticked on the product. The user must not remove, dirty or 

deface these labels. The warranty will be void if these labels are falsified. Contact the retailer or manufacturer to get 

new ones if needed. 

 

In the event of a malfunction, return the unit to your dealer, enclosing: 

-

 

a dated proof of purchase (till receipt, invoice...) 

-

 

a note explaining the malfunction. 

-

 

Copy of "Regular Security Checks"

 

 

 

SPARE PARTS 

 

 

 

 

 

 

 

 

 

 

 

1  Complete lifting frame 
2 Rubber 

pads 

x4 

3 Cylinder 
4  Hydraulic power pack 220V with wired remote control 
5  flexible long hydraulique (X2)  

Summary of Contents for LUXMAIN QUICK LIFT L520E



















Reviews: