GYS LUXMAIN QUICK LIFT L520E, Operating And Control Manual

7 

Castors are provided on the QUICK LIFT to move the ramps easily and to allow them to be properly positioned under 
the vehicle. Use the handles to carry the ramps one by one more easily. 

Step 2: Place the hydraulic power pack at least 2 meters away from the ramps without connecting it 
electrically. Attach the long hydraulic hoses to the hydraulic power pack. Do not overtighten, the sealing 
is done automatically with the conical seat of the connections.

Step 3: The tank of the hydraulic unit is empty. It must be filled with hydraulic oil or automatic 

transmission fluid before starting operation. Approved fluids are general purpose hydraulic oils or 

synthetic automatic transmission oils with a viscosity index of 32 cSt at 40°C.

Remove the fuel filler cap and fill it with up to 3.5L of oil through a clean funnel. Check the level and adjust if 

necessary. 

Electrical outlet 

Wired telecom 

Hydraulic power pack 

Long hydraulic hoses (X2) 

Casters 

Locking bar 

(On the outside) 

Locking bar 

(On the outside) 

Short hydraulic hoses (X2) 

Transport 

handles