7
PSW 600 W / 1000 W / 1500 W - 12 V /
1500 W - 12 V + RC / 1500 W - 24 V
EN
Translation of the original instructions
7
SAFETY INSTRUCTIONS
This manual includes guidelines on the operation of your device
and the precautions to follow for your own safety. Ensure it is read
carefully before first use and keep it handy for future reference.
These instructions should be read and understood before anyone
operates the product. Any modifications or maintenance that are
not specified in the manual should not be undertaken. The manufac-
turer is not liable for any injury or damage due to non-compliance
with the instruction manual. In case of problems or uncertainties,
please consult a qualified person that is able to handle the device
correctly. This device should only be used within the limits indicated
on the device and in the manual. The safety instructions must be fol-
lowed. In case of improper or unsafe use, the manufacturer cannot
be held responsible.
Device suitable for indoor use only. Do not expose to rain or exces-
sive moisture.
Do not cover the device
Do not place the device near a fire or subject it to heat or to long-
term temperatures exceeding 50°C
Do not obstruct the cooling vents. Refer to the installation section
before operating the machine.
The automatic mode of operation and usage restrictions are explai-
ned below in these operating instructions.
Risk of explosion and fire!
A battery being charged can emit explosive gas.
• During the charge, the battery must be placed in a well ventilated
area.
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-cir-
cuiting.
Acid projection hazard!
• Wear safety goggles and protective gloves
• If your eyes or skin come into contact with battery acid, rinse the
affected part of the body with plenty of water and seek imme-
diate medical assistance.
Connection:
• This machine is fuse-protected
Maintenance:
• Service should be performed by a qualified person
• Under no circumstances should solvents or other aggressive clea-
ning agents be used.
