ELECTRO FREEZE Shake Model CS704
185260
13
1. BRUSH - HC158010.
6-inch diameter
used to clean the cylinder.
2. HANDLE - HC158012.
36-inch handle
used with brush p/n HC15010.
3. BRUSH - HC158077.
9/16-inch in
diameter with 36-inch handle used to clean
drain tube.
4. BRUSH - DOUBLE END - HC158003.
1-1/8-inch diameter and 7/16-inch diameter
used for cleaning mix feed tube and general
cleaning.
5. TOOL - O-RING REMOVAL.
HC169374.
Aids in removing O-rings from
plunger, head, air relief plug, and spindle.
6. LUBRICANT - COMPOUND 7
(SEVEN) HC158066.
Approved lubricant for
moving parts, peristolic tubes and O-rings.
6.1 Cleaning Accessories
6 Disassembly and Cleaning
7. BRUSH - HC158026.
1-inch in
diameter 12 inches long used to clean the
hopper walls.
8. WASH BOTTLE - HC196103.
used to
flush the plunger and hopper walls.
9. BRUSH - HC158028.
3/8 inch
diameter x 1/2-inch 21 inch handle used to
clean mix chamber ports and syrup hoses.
9. BEAKER - 150 ML HC196109.
Used
in syrup calibration. (not shown)
10. KIT - O-RING.
Contains all O-rings
and seals needing replacement on a regular
basis. (not shown)
The following accessories shipped with the freezer are necessary for cleaning,
sanitizing, and disassembly/assembly:
Figure 6-1 Accessories
CAUTION
To avoid electrical shock or
contact with moving parts,
make sure all switches are in
the “OFF” position and that
the main power supply is
disconnected.
It is important that the freezer be
disassembled, washed, lubricated and
sanitized before operation.
The cleaning and sanitizing instructions
explained in this manual are required to
maintain a clean, sanitary freezer. The
freezer should be disassembled, cleaned,
reassembled, lubricated and sanitized to
ensure the best possible product quality
and freezer operation.
Persons assembling, cleaning, or
sanitizing the freezer must wash and
sanitize hands and forearms with an
approved sanitizer.
HC158066 LUBRICANT-COMPOUND 7 (SEVEN)
5.3 OZ TUBE
Summary of Contents for Arby's Electro Freeze Compact Series
