background image

ELECTRO FREEZE  Model CS600

22

 184596

12  Routine Maintenance 

- continued

USE ONLY ORIGINAL OR AUTHORIZED REPLACEMENT PARTS WITH THIS
FREEZER.

If you have any questions on items that are not included in this schedule or problems that
require service assistance, please call your local distributor or H.C. Duke & Son, LLC,

Electro Freeze

 Service Department for factory service assistance.

Phone: (309) 755-4553 or (800) 755-4545

FAX: (309) 755-9858

WINTER STORAGE

To protect the unit during seasonal shutdown, it is important to
store the freezer properly. Use the following procedures:

1.  Disconnect all power to the freezer.

2. Disassemble and wash all parts that come into contact

with the mix using a warm, mild detergent solution. Rinse in clear
water and dry all parts thoroughly. Clean drain tube and all
exterior panels.

3. Store the loose parts, such as the head assembly and

beater assembly, in a safe, dry place.

4. Do not lay heavy objects on the plastic or rubber parts.

5. Cover the freezer and all loose parts to protect them from

dust or other elements that could contaminate them while in
storage. Place the freezer in a dry location.

6. Have condenser fins cleaned by a qualified service

technician.

Summary of Contents for Electro Freeze COMPACT Series

























































Reviews: